There are numerous dash cameras in the market. Many people however opt for the rearview dash cam mirror mounted ones. And this is pretty obvious because they are surprisingly easier to install. They also do not block the driver’s view of the road. Mirror-mounted dash cameras rarely cause any legal issues associated with their mounting location.
People equip their cars and trucks with dash cams for several reasons. They not only act as independent witnesses on the roads but also ensure the safety of your vehicle while it is in the parking mode, with its unique surveillance system.
This is particularly true for a dashcam with parking mode. This article outlines some of the most commonly used dash cam mirror mounts in the market you can consider purchasing alongside your favorite dash cams.
1. Dash Cam Mirror Mount, Universal Dash Cam/DVR Mount Holder, Compatible with Most Other Dash Camera.
This dashcam mirror mounts from TiToeKi is very universal. It can accommodate nearly all types of dash cams. It comes with more than ten different joints and is pretty much easy to install and remove. Once mounted, it never falls from the windshield. It is designed in such a way that it can rotate up to 360 degrees, providing a wider angle adjustment for your dashcam footage.
Another of its special feature is the swivel ball adapter head which offers the mirror mount enough flexibility for you to position your camera well. This ultra-slim dashboard camera mirror mount is suitable for the rearview mirror. It measures 9.70mm with a cylindrical-shaped stem that has a minimum length of 0.4”(10mm) and a diameter ball of 15.8 mm.
While this dashcam is compatible with YI 2.7″, Rexing V1, UGSHD, Z-Edge, Old Shark, KDLINKS X1, Crosstour, and most other Dash Camera, it is certainly not suitable for other dash cameras such as Vantrue N2 Pro, WheelWitness HD PRO, KDLINKS X1. This can make a perfect dash cam for truckers.
Some of these dash cam mirror mount users noted it can fit perfectly with minor modifications. Others loved its numerous attachments for different dashcams and how it enabled them to capture great video content. They however disliked that it did not attach very well as they had anticipated.
Rotation design: 360 degrees.
Ultra-slim 9.20mm design.
Cylindrical Shaped stem 0.4”(10mm) long minimum.
Compatibility: YI 2.7″, Rexing V1, Crosstour 1080P, Z-Edge, Old Shark, YI, APEMAN，Roav，E-ACE，Falcon Zero F170HD and Most Other Dash Camera.
Not compatible with: Vantrue N2 Pro, WheelWitness HD PRO, KDLINKS X1, etc
Easy to install and remove
Has 360 degrees rotation, providing a wider angle adjustment.
Comes in an ultra-slim and flexible design, suitable for most cars.
Does not fit all types of dash cameras such as Vantrue N2 Pro, WheelWitness HD PRO, and KDLINKS X1.
2. Flexible Dash Cam Mirror Mount Kit for Most Dash Camera and Car Camera.
If you happen to be a frequent driver on the roads, then, this is a must-have dash cam mirror mount kit. This suction mount from AMORTEK is designed with seven different joints which accommodate most car dash cameras in the market.
These include Rexing V1, Z Edge, Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE among other hot selling dash cams you may think of. When you mount your dashcam with this behind your car’s rearview mirror, it will provide you as a driver, with a better view. It can also rotate up to 360 degrees, hence, you can adjust your dashcam at any viewing angle.
This ultra-slim snake mount design measures 9.70mm and is suitable for your rearview mirror. If you have been looking for a sturdy mirror mount, then, this is it! It is also resistant to heat and once mounted, it does not fall off the windshield. It is padded with environmental silicone rubber, making it anti-slip and anti-shake.
This dashcam has universal compatibility. It can even accommodate your smartphone and mini-tablet. Its inbuilt wireless charging pad can detect the presence of foreign objects and turn off automatically in hot conditions preventing your dashcam from overheating.
Users of this dash cam mirror mount loved the fact that it is very stable, secure, and durable; and is easy to install. They however disliked the fact that it is not compatible with some of the dash cams.
Batteries not included.
Rotation design: 360 degrees
Mounting Type: Suction mount.
Other features: Environmental silicone rubber pad, anti-slip and anti-shake, heat-resistant.
Suitable for: Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.
Very stable and offers sturdy support to your dashcam.
Does not accommodate all types of dash cams.
3. Universal Dash Cam Mount Rear View Mirror Holder
This amazing mirror mount is compatible with at least 99% of the dash cams, GPS, DVR, and camcorders available in the market. It has 16 different joints kits. It is however not compatible with Garmin, Crosstour CR900, and other similar back slots. This dashcam mount has a ball diameter of 0.63inch. It comes in an ultra-slim design of 9.70mm, with a clamping diameter range of 13-65mm (0.5-25.6in).
This mirror mount dashcam is sturdy and cannot easily slip or break. Its heat-resistant property ensures it can still be in operation even in hot climate conditions. When you mount it in your rearview mirror, this dash cam will provide you with better views of the roads. The design is also absolutely flexible, rotating up to 360 degrees to allow you to adjust the dash cam’s angle of view. All dash cams require accessories like this dash cam mirror mount. Your driving experience will be better.
It is compatible with Rexing V1P, Yi, YI Nightscape, Roav, Zhiroad, Byakov, Pathinglek, Trekpow, Old Shark, UGSHD, Z-Edge, Crosstour, Falcon F170, etc. (including but not limited to). It is however not compatible with Garmin, Crosstour CR900, WheelWitness HD PRO, KDLINKS X1, and other products with a similar back slot.
Users of this mirror mount dash loved how quick it was for them to install, allowing them to hide the camera behind the mirror. Some of the users however encountered problems with fixing the single wing nut into the bolt.
Rotation design: 360 degrees.
Material: Plastic and rubber
Clamping Diameter Range: 0.5-2.6 inches
Compatible with: Rexing V1P, Yi , YI Nightscape, Roav, Zhiroad, Byakov, Pathinglek, Trekpow, Old Shark, UGSHD, Z-Edge, Crosstour, Falcon F170 and etc.
Not compatible with: Garmin, Crosstour CR900, WheelWitness HD PRO, KDLINKS X1 and other products with similar back slot.
Super quick to install
Some dash cams cannot be mounted with this mirror mount.
4. APEMAN Dash Cam Mirror Mount Kit, Car Rear View Mirror Mount Holder with 360 Degree Free Rotation.
The APENMAN dash cam mirror mount kit has four different joints and can be used by many other car dash cameras. Its rotation angle is 360 degrees, providing freedom of adjusting the mounted dashcam into any direction for a better view.
Once it is fitted perfectly behind the rearview mirror, it cannot distract the driver. It is fitted with POM and ABS plastics which makes it more stable and durable. You will have a smooth contact surface with the silicone plastic belt.
The car’s protective film will not be damaged. It is designed in a way that makes it easy to install without requiring any special tools. It has to be used on the rear-view mirror with a clamping diameter range of between 38mm-65mm.
Users loved the quality of both the front and rear cameras which had a clear picture and video grasp. They also found the cables easy to secure, eliminating what could have been a potential viewing barrier between the driver and the road. Some, however, found it hard to get tight and snug as the adjustment screws were difficult behind the mirror. Others noted the camera can develop severe wobble while driving.
Ball Diameter: 15mm
Rotation design: 360 degrees.
Clamping diameter range: 38mm-65mm
Ultra-slim: 9.70mm design to suit most car rear view mirror
Works well with different types of cameras.
May wobble while driving.
Before buying your dash cam, it is important to consider the kind of mount kit you will require. There are many types of dash cam mirror mounts in the market such as the ones described above.
While most of them are universal, you have to ensure the one you purchase is compatible with your dash cam. When you are buying, consider the size, shape and setup of the mirror mount. Some may be bigger physically than they appear on online photos.
Ensure their size and setup do not obstruct your view as a driver. Take a keen look at the specifications of the camera and its related dimensions.
Use a tape to compare these dimensions with that of your car and see if it can be a good fit before purchasing. You will have an idea of how it will look like once it is mounted.