Best Fast Wireless Car Phone Charger Mounts To Buy In 2021

As the world goes full throttle to automate and enable gadgets for remote operations, the mobile phone has not been left behind. The introduction of Wireless Car Charger Mounts, for example, is one such example, and it is a development that gives relief to millions of phone users whose dislike for cabled accessories had hit the fever pitch.

See our list of 20 wireless car charger mounts that should bring an end to your phone charging issues while you are on the road. List of 20 Wireless Car Charger Mounts

Table of Contents

1. VANMASS 15W Wireless Car Charger Mount, Electric Automatic Clamping.

This wireless charher can deliver 15 Watts of power, and it is Qi certified to charge compatible phones at a crazy speed. In case you own an LG G7Thin Q or an iPhone 11 Pro Max/11/11 Pro/ Xs /8 (7.5W), then this is your deal. It also works with the LG V30+( 5W), Samsung S10, and Note 10/9(10W).  Remember, though, that the gadget is not confined to the phones as mentioned above alone, but it can serve all other Qi-enabled 5W phones.

It has best automatic clamping mount whose electric motorized arms firmly clamp the phone when it is pushed to recline on the holder. Once charged or in case you need to take the phone, gently press on any of the quick-release buttons, and the arms will automatically loosen their grip.

Another exciting feature that boosts VANMASS 15W car charger is that it can charge directly through the phone’s protective cases. In other words, it is phone case friendly. You can charge through plastic, rubber and TPU cases as long as they are less than 4 millimeters thick. If the case is above 4 mm thick, you may have to remove it to charge.

VANMASS 15W Wireless Car Charger Mount
VANMASS 15W

Do you notice the soft and executive silicone bumpers in the arms? Well, these are meant to give your phone a scratch less hold while it enjoys a stable grip courtesy of the sticky suction cup mount and adjustable feet.  

You can either mount it on the dashboard, windshield, or on the horizontal air vent. And for convenience and flexibility, an adjustable swivel is provided to allow you to make smooth rotations and fix the phone at your preferred angle. As a word of caution, never set the Mount on the windshield when it is sunny hot because temperatures above 104℉ tend to impact negatively on the stickiness of the cup.

The VANMASS 15W package contains one suction mount, a dashboard pad, one vent mount, one wireless charger mount, one 4.92FT/1.5M USB C cable, and a user manual

2. Kenu Airframe  Vent Car Phone Mount  for Android and iPhone Small to Medium Smartphones Car Accessories Phone Holder.

The Kenu Airframe ranks as one of the most portable car mounts for smartphones. Using this gadget is as easy as counting ABC because all you have to do is to attach it on an air vent and then fix on your phone. Simple indeed, and Airframe’s lightweight makes it an excellent companion while on business trips and vacations.

Kenu Airframe Car Mounts ranks as one of the most portable car mounts for smartphones
Kenu Airframe  Vent Car Phone Mount

As a driving companion, the Kenu Airframe car phone mount holds your smartphone in an excellent position to follow the GPS prompts, receive hands-free calls or stream music. It leverages a rotating clip to remain securely mounted onto the vent in an angled, vertical or horizontal position.

Airframe’s 2.9 inches fully expandable jaw tightly holds smartphones with screens measuring up to 5 inches. These phones include iPhone 5s, 5, 5c, and 6/6s. What about larger screen phones like the iPhone 6 plus and the Android or Windows phablets?  Well, for these, you can acquire the Airframe+.

A little bit of creativity can help you transform the Kenu Airframe phone mount  into an excellent hands-free stand. All you need to do is pull out a card from your wallet and insert it into the rotating clip. The gadget is handy, pocket-size, and only weighs an ounce.

3. PanaVise PortaGrip Phone Holder with Telescoping Windshield Mount

The PanVise PortaGrip holder takes phones measuring 2.25 inches to 3.75 inches wide – cased or without a case. Its side arms can adjust to accommodate most premium phones, including Samsung, iPhone 6, HTC, Motorola, and LG. It can as well hold executive handsets like the iPhone 6 Plus and Samsung Galaxy Note 4.

PanaVise PortaGrip Phone Holder with Telescoping Windshield Mount
PanaVise PortaGrip Phone Holder

It comes with a powerful suction cup that mounts to the vehicle windshield, and you can easily move it from one vehicle to the other. About installation, ensure the Mount is installed at the windshield base with its shaft resting on the dashboard. It rests on the dashboard to provide support against excessive weight.

The good news is that this PanaVise cell phone car holded also covers those using trucks or vans with deeper dashboards as well. This is made possible by a telescoping arm that stretches out to 18 inches. The PanaVise can tilt, rotate, and turn- in other words; it is fully adjustable. 

It weighs 1.25 pounds and measures 12x4x4 inches

4. Puggtevo Car Cell Phone Holder for Air Vent Phone Mount Holder for All Smart Phone

This car phone mounting gadget supports all premium smartphones as provided; they are not over 3mm thick. It is a case-friendly, one-hand operation car phone mount that will lock automatically once the phone is placed on. It is quite handy because the bracket height is only 38mm.

To operate, just fix the clip on to your air vent. It is possible to place and withdraw your handset by one hand. It offers room for fast and straightforward automatic phone mount adjustments.

Puggtevo Car Cell Phone Holder for Air Vent
Puggtevo Car Cell Phone Holder

The holder’s solid grip is a real source of confidence because it doesn’t matter whether you hit an emergency brake or run on a bumpy road. Your phone will still be safe because its six-point support security gives enough friction for adequate stability

It is widely compatible because it covers many kinds of smartphones ranging from 4.7 inches to 6.5 inches. You can install it on most air vents.

The holder measures 4.9 x 3.6 x 2 inches, and it weighs 2.4 ounces

5. Scosche MPQ2V Magicmount Magnetic Vent Mount Holder Charger for Vehicles

Scosche MPQ2V vent mount charger can be fixed to any vehicle as long as it has vent clips. What’s more, if your phone is Qi-enabled, you can wirelessly charge it with 10 watts of charging power. It serves Android, iPhone, and other Qi-compatible devices, and the charging goes on remotely without involving any charging cables.

Scosche MPQ2V Magicmount Magnetic Vent Mount Holder Charger for Vehicles.
Scosche Magicmount Magnetic Vent Phone Holder

It features a foreign object detector, which ensures that charging only goes on when nothing is causing an obstruction. And, no matter which car you drive, this portable Mount can secure your phone using the removable vent clips. This means that this in car phone mount can be moved from one car to another without any hitches, and the Mount will use the powerful rare- earth neodymium magnets to hold your devices. Rare-earth neodymium magnets are stronger than ordinary phone car mounts by at least 30% making offer the best magnetic cell phone mount holder.

Scosche’s 360-degree rotation feature creates room to adjust and get an appropriate view from any angle. To lock or unlock the phone, simply press the provided one-touch push button.

Scosche’s package comes with one Qi-certified Mount, one vent clip, five magic plates, three template guides, two-wire clips one micro USB to USB cable, one 12 V car adaptor, one alcohol prep wipe, and one user manual.

6. Anker Wireless Charger PowerWave 7.5 Car Charger with Air Vent Phone Holder iPhone, Galaxy the Quick Charge Car Charger Included

Anker Wireless Charger is Qi certified to charge compatible phones at high speed. Some of the models that benefit from this technology are LG and Samsung flagship models (10W) and the latest iPhone (7.5W). For this service, though, you need a Quick Charge 3.0 charger. Included in the package is a two-port car charger that you can use on the PowerWave car mount to charge another device.

Do you have to remove the case to charge? Not all;  PowerWave can charge through most protective cases including plastic, rubber, and TPU provided they are less than 5 millimeters thick. However, metal, magnets, or cards can affect charging.

Anker Wireless Charger PowerWave 7.5 Car Charger with Air Vent Phone Holder iPhone.
Anker Wireless Charger is Qi certified

Apart from its universal device compatibility, PowerWave is endowed with a universal fit. That means that you can securely attach it to any vehicle’s air vents.  It also features a 360 degrees rotation that enables you to flip around your phone to use the GPS and see incoming calls.

High-end phone owners are always keen to know how safe their handsets are when exposed to specific accessories. With PowerWave, though, you don’t have to worry because it has a lot of protective measures in place. Talk about temperature control, radiation shielding, object detection, and more. Your device is safe and sound while charging.

In the 10 Watts fast charge mode (2.0/3.0 Adapter)  you can charge;

Samsung Galaxy S6 edge/ S7/ S7edge /S8+/ S8/ S9 / S9+/ S10

Samsung Note 7 / Note 8/ Note 9/ Note 10

In the 7.5 Watt charge mode (2.0/3.0 Adapter) you can charge;

iPhone 11 / 11 Pro / XS Max / 11 Pro Max / iPhone XR / iPhone X / iPhone XS / iPhone 8 / 8 Plus

In the 5 Watt Standard Charge Mode: (5V/2A Adapter)

All Qi-enabled mobile phones and devices

Here is what you get in the package:

PowerWave 7.5 Car Mount, 2 Air-Vent Grips, 2-Port Quick Charge, 3.0 Car Charger, 3 ft Micro USB Cable, Welcome guide, Worry-free 18-month warrant and Friendly customer service.

7. PureGear AutoGrip 10W Wireless Car Charger for Qi Enabled Phone, Self Gripping System, Vent Mount- Upgraded Version)

To use the self-gripping system, simply put your mobile phone in the car holder, and the cell phone mount support arms will close unassisted. The arms close once the charging pad picks up the signal on your Qi-enabled phone. It is quite safe and convenient, especially when you are driving.

PureGear AutoGrip 10W Wireless Car Charger for Qi Enabled Phone
PureGear AutoGrip 10W

PureGear comes with an array of Qi-certified wireless capabilities, and it can charge iPhone 8/8 Plus and iPhone X at 7.5 Watts. It charges more high-end phones, including the Samsung Note 8, S6/6 Edge, S7/7 Edge, S8/8+, Samsung Galaxy S9/9+, and more at 10 Watts. Some of the accessories that support the PureGear AutoGrip system are a 3 feet USB charging cable and a Qualcomm 3.0 Car Charger.

For maximum stability, you will also get a sturdy vent mount bracket to fit in your car’s air vent plus an adjustable support base that is compatible with most mobile phones. What’s more, the Mount’s rotating bracket enables you to twist your phone to an angle that gives you the best visual experience. Ultimately, the deal is capped and sealed with a thirty-day money-back guarantee plus a one-year limited warranty.

8. Rokform iPhone 6/6s PLUS Predator Series Slim Magnetic Aluminum Phone case and universal magnetic car mount (Black)

The Rockform iPhone 6/6s PLUS, Predator phone case, is made from some high-quality materials. Ever heard of aircraft-grade 6061 T-6 aluminum? Well, that is the quality of the material we are talking about. Each product is CNC machined to the required specifications, and it undergoes quality hand inspection before receiving the protective anodized finish. It is not only slim, but light and holding it in your hand gives you a superb feeling.

 The design of Rokform iPhone mount allows you to access all the ports and buttons comfortably, and its elite minimalist design makes it ideal for both sexes. Predator’s scratch-free design also serves to protect your screen from scratches, and the phone is well protected, whether it is screen up or screen down.

Rokform iPhone 6/6s PLUS Predator Series Slim Magnetic Aluminum Phone case
Rokform iPhone mount

It features an anti-slip grip to keep your phone from sliding and a strong RoSafe magnet to stick to magnetic surfaces. Rokform brings on board a super magnetic cell phone mounting that is more ideal for the Apple iPhone. And the good news is that this magnet doesn’t affect your Blue tooth, Apple Pay, Wi-Fi, or GPS navigation.

Mobile phones slip out of our hands and drop once in a while, and it is more concerning, especially when it is an expensive phone at risk. However, Rokform puts this risk aside because its rubber bumpers securely cushion the telephone from all shock impact and accidental falling.

9. Enduro Golf Cart Mount for Phone and SkyCaddie SX500 – TACKFORM – Rock Solid All-Metal Holder.

Enduro golf is an all-aluminum clamp designed for golfers, and it can accommodate bars or poles of up to 1.25 inches.  It also mounts a desk table or all flat surfaces below 1 5/8 inches thick. This is a stable weatherproof phone mount that ensures the safety of your phone no matter the terrain. It comes in a compact industrial design and is quite handy and easy to stow away in your bag. Using the Enduro golf cart mount, you can capture and get the analysis of the swing on the App in an instant.

Enduro Golf Cart Mount for Phone and SkyCaddie SX500
Enduro Golf Cart Mount for Phone

All you have to do is to mount it on the cart and use the golf GPS app, and the go-to-golf App will ably assist you in keeping the scores hands free. Whether the cart windshield is up or down, your phone will remain in a secure grip. Also, it doesn’t matter whether thephone  Mount is holding your phone on the table, bench, bag, pole, or any other place on the golf course; you can rest assured that your phone is safe and all secure.

The omnidirectional metal cradle supports devices measuring up to 5 inches thick and 3.4 inches wide. Also, it is more compatible with several GPS units, including the SkyCraddie SX500.

This is a spring-loaded phone mount that allows you to insert the phone in and out with just one hand and adjust it to your convenient angle or position. You will also notice the metal construction and rubber inserts that pair up with the industrial springs to hold the mobile phone most securely.

10. RAM X-Grip Large Phone Mount with RAM Twist-Lock Suction Cup Base

This Mount boasts an X design, and it is initially made for larger phones. It wields incredible holding power, but the good thing about it is that it holds your phone without hiding it. The RAM X –Grip’s X design can expand and contract to fit your device well, even if it is in its case. The itemcomes with a twist lock suction cup base to mount on surfaces like the vehicle windshield.

Furthermore, this phone car dash holder uses the ball and socket technology to enable you to adjust it anyhow.

RAM MOUNT X-Grip Large Phone Mount with RAM Twist-Lock Suction Cup Base
Ram Mount car dash holder

It is made of aluminum (Marine grade and powder coated), high strength composite, and stainless steel components. The quality of these material components is meant to make it more durable and reliable in more demanding environments. For outdoor purposes, the RAM X –Grip has a device tether for an additional layer of security and your peace of mind.

Below are the phones which are compatible with the RAM X-Grip

Apple iPhone 6s Plus, Weight:0.73 lbs, Galaxy S8, Galaxy S10 5G, Huawei Mate 20 X, RV 660LMT, iPhone 7 Plus, Google Pixel 2 XL, Galaxy A9 Pro (2016), Galaxy Note 10 Plus, Galaxy On7, iPhone 8 Plus, iPhone Xs Max, Galaxy A8 (2016), Galaxy A9 (2016), Pixel 3 XL, DriveTrack 71, RV 770 LMT-S, Pixel 3a XL, Galaxy J7,

11. VANMASS Wireless Car Charger Mount is Automatic Clamping Qi 10W 7.5W Fast Charging Car Mount.

The Van mass wireless car charger mount design presents with a charger and phone holder in a single unit to save you the agony of tangled cables and cords. It comes with a pair of automatic clamping arms that close automatically and grip the phone as soon as the motor sensor detects the phone. And to release the handset, simply press on the release buttons on either side of the gadget, and the clips will loosen for you to take the phone.

VANMASS Wireless Car Charger Mount is Automatic Clamping Qi 10W 7.5W Fast Charging Car Mount,
Van mass wireless car charger mount

This mount charger is Qi certified, meaning that it uses a smart chip that can identify the wireless fast charge and even determine the level of Wattage i.e., 10Watt, 7.5 Watts, or 5 Watts. Please note that for an effective, quick charge, you need to use the QC 3.0 car charger. It has a soft indicator light that serves to remind you when the battery is charged fully, but usually, when the charge is full, the process will be interrupted automatically. 

There are three places in your car where you can comfortably install VANMASS, and these are; the air vent, dashboard, and the windshield. It has a powerful suction cup that holds firmly on surfaces and an adjustable arm too. The 360 degrees joint ball is in place to enable you to find a proper viewing angle and for safe driving as well.

Moreover, the ventilation holder is designed to provide the flexibility of mounting the charger on the air vent. Several happy users have reviewed and voted this as their best air vent phone mount.

Ideal for mobile phones measuring 4 inches to 6.5 inches, VANMASS is compatible with

iPhone 11 Pro MAX / 11 pro/ Xs/XR/ Xs Max/X/8 and 8 plus.

Samsung Galaxy S10 / S10e/ S10+/ S8 plus / S7 / S7edge / S9 / S9 Plus / S8 / Note 10/9/8 and few more Qi enable phones

12. ZeeHoo Wireless Car Charger,15W Qi Fast Charging Auto-Clamping Car Mount.

The ZeeHoo Wireless Car Charger has a smart automatic sensor that regulates the opening and closing of the cell phone holder clamps. Immediately you insert the phone into the holder, the arms will close in to hold it firmly.

Once the phone is fully charged, and you want to remove it, gently touch on the release buttons on the sides, and the clamps will open automatically. Also, the ZeeHoo car charger is programmed to power off automatically once the phone is charged. This measure helps to protect your battery from the damage that accrues from excessive charging.

The ZeeHoo Wireless Car Charger has a smart automatic sensor that regulates the opening and closing of the cell phone holder clamps.
ZeeHoo Wireless Car Charger

Zeehoo charger has two in one product which combines the Zeehoo phone holder and the Zeehoo Qi wireless charger. Aside from rapid charging, the wireless chargers saves you from the hustle of cables, and it guarantees you safer driving. 

Zeehoo wireless is case-friendly, meaning that while charging, you don’t have to remove the phone case. ( Well, give an exception to the rugged, uneven case ) Its holder can handle all handsets with a width of 60-80 millimeters tightly. These include 

Samsung S10/S9/S8/S7/S6 Edge +/Note 5 ( 7.5 Watts)

iPhone XS Max/XS/XR/X/8,(  5W )

All other Qi-enabled phones for 10 Watts and 7.5 W

To use the fast charge mode, the QC 3.0 car charger adaptor is necessary.

It has a strong suction cup that allows you to install it in several areas within the car securely. This can be on the windshield or the dashboard table. You will also appreciate the 360-degree rotation that enables you to position your phone at the most suitable angle to receive calls or use the GPS.

The full package consists of one Qi Wireless Car Charger, one suction cup mount, One air vent clip, One type C cable (length 1M/3.28FT), one air vent clip, a user manual, and an 18-month worry-free warranty 

13. VICSEED Qi Wireless Car Charger 10W Fast Wireless Charger Car Mount.

So much work is being done to improve the wireless car charger, and VICSEED just happens to be one of those milestones. This is arguably one of the fastest wireless car chargers because it works 50% faster than an ordinary wireless car charger mount. 

Its 10 Watt gadget charges the Samsung Galaxy Note 8, Note 9, S8+ S9 S9+ S8, and other Android phones. You can get 7.5 Watts for iPhone Xs and more phones in that category while 5W does standard charging. For 10W and 7.5 W, though, you must use the QC 3.0 car charger adaptor.

VICSEED Qi Wireless Car Charger 10W Fast Wireless Charger Car Mount is Auto-Clamping Dashboard
VICSEED Qi Wireless Car Charger 10W

For easy alignment, the charger features an adjustable foot position to ensure that the Qi function works well all the time. It also comes with a new electric clamp that will close in to hold the phone once the pad detects your phone. To open and take the phone, gently touch the release buttons on the sides, and the clamps will release your phone.

With VICSEED, your phone is safe because of the extremely stable protection. The gadget uses a very advanced motor-driven clamp that ensures your phone doesn’t fall no matter what. Whether you hit a pothole or a high bump, the clamping force is enough to keep your phone safely tucked in a luxurious silicone pad base.

14. iOttie Wireless Car Charger Auto Sense Qi Charging with Automatic Clamping Dashboard Phone Mount.

The auto-sense is yet another highly advanced wireless charging car mount that promises lots of convenience and safety on the road. To position your phone for charging, just place it on the pad, and then the Mount’s sensor will detect and close the arms automatically.

Once the arms secure it in the cradle, Qi wireless will charge the phone without additional cables. And immediately charging is complete, please remove the phone to protect the battery from damage. To do this, you simply have to press on the release buttons on the side, and the clamps will loosen up instantly.

iOttie Wireless Car Charger Auto Sense Qi Charging Automatic Clamping Dashboard Phone Mount
iOttie Wireless Car Charger

To install the charger, fix the strong suction cup on your windshield or dashboard. And for a superior sticking strength, you will get a reusable suction cup combo and a disposable dashboard disc. Auto Sense features a uniquely crafted telescopic arm that pulls out from 4.9 inches to 8.3 inches and pivots on 225 degrees arc to give you a choice for optimal positions.

The full package consists of an auto-sense mount, reflective sticker, dashboard pad, and the dual USB car charger.

15. 2020 Andobil Qi Wireless Car Charger Mount, Hands-Free Auto Clamping and Fast Charging Air Vent Dashboard Car Phone Holder.

The 2020 Andobil car charger mount also stands out as one of the fastest charging units. Its upgraded, 3rd generation copper coils gives it the capacity to charge 50% faster than ordinary gadgets.

When it comes to holding the phone, the wireless charger operates pretty much like a robot. As soon as you place the phone on the pad, Andobil will sense and draw in the clamps to fasten a grip on the phone. The phone remains so secure that even if you are riding on a bumpy road, it won’t fall off.

The 2020 Andobil car charger mount also stands out as one of the fastest charging units.
2020 Andobil Qi Wireless Car Charger Mount

For ultimate stability, you will mount the gadget on the dashboard, air vent, or windshield with no challenge at all. Clipping the charger on the adjustable air vent also means that you can position your phone at a suitable angle that allows you to enjoy driving as you use GPS and monitor other activities on the screen.

Andobil QI Wireless Fast Car Charger mounts work more suitably with Qi phones measuring 4.7 inches to 6.3 inches.

The 7.5 Watt fast charging serves

iPhone 11 / 11 Pro / 11 Pro Max / Xs/ Xr/ 8/ 8 Plus

The 10 Watt fast charging for Samsung serves

Samsung Galaxy Note10

Note 9/ Note 8/ S9/ S9 Plus/ S8/ S8 Plus/ S7

LG and other Qi enable devices.

And for fast charging always use the QC 3.0 adapter

16. VICSEED 3-in-1 Wireless Car Charger Mount Qi Fast Charging 10W and 7.5W Dashboard, Windshield and Air Vent Phone Holder for Car Mount Fit for iPhone.

The VICSEED 3-in-1 wireless car mount charger brings on board some of the latest smart chip technology. It also features a bigger copper coil, which effectively makes it 50% faster than ordinary wireless car chargers. It is Qi certified and provided with a built-in intelligent protect system to secure the phone from over-charging effects, short-circuiting, current surge, and temperature issues. Please use the QC 3.0 adaptor.

VICSEED 3-in-1 Wireless Car Charger Mount Qi Fast Charging 10W and 7.5W Dashboard
VICSEED 3-in-1 Wireless Car Charger Mount

You should no longer worry about your phone dropping or scratching because the device offers full silicone protection. Also, its mechanical lock system holds the phone firmly enough to prevent it from falling no matter the circumstances. And one significant advantage with the non-electronic, mechanical lock is that it serves you for long without the fear of running out battery.

VICSEED 3-in-1 has a long arm width and an adjustable bottom tray making it universally compatible with other Qi enabled phones. It is therefore compatible with

10W fast charging for;

Samsung Galaxy S20 / S20+

Note10 / Note10+ / Note9 S10 / S9

LG G7 ThinQ / V30 / V30S

7.5W fast charging for

iPhone 11 / 11 Pro Max / 8 plus / X / XS / XR.

Before charging, please ensure that no metallic elements are surrounding your phone because these interfere with charging. You can fix the charger mount on the dashboard, air vent, or windshield, and using the 360 ball joint; you can position your phone in the most suitable position for a safe and enjoyable driving experience. VICSEED- 3-in-1 is quite advanced yet not as pricey as you would imagine and for most users this makes it their best buy car phone mount.

17. Belkin Boost Up Wireless Charging Vent Mount 10W Wireless Car Charger Mount for iPhones and More

Belkin car charging vent mount charges your smartphone pretty fast, and it is compatible with Samsung and Apple’s fast wireless charging gadgets. Once it detects the phone, the arms will close in and hold it securely within the charging range. You receive a quick power boost as you continue using GPS, hands-free calls, and much more. The grip that Belkin places on your phone is strong enough to secure it against shifting position or dropping no matter the terrain.

Belkin Boost Up Wireless Charging Vent Mount 10W  Wireless
Belkin Wireless Charging Vent Mount

You can flip your phone and use it at any angle, whether portrait or landscape, without interrupting the charging process. The fact is you can rotate the phone up to 180 degrees to capture your navigation apps at the most favorable angle. 

Other Related:

Best Car Safety Hammer Reviews For Emergency Responses

Best Wireless Backup Camera Systems Reviews

Its clips fit comfortably on most vents, meaning you can use it in any car. And if your phone’s screen measures up to 5.5 inches, then this is your deal because the expandable brackets fit screens up to that size.

The 10 W Boost up wireless charging pad is designed to charge through light plastic cases of up to 3millimeters. So, that you don’t necessarily have to take off the case before charging. 

Below are the phones that work compatibly with the Belkin boost.

iPhone 11, 11 Pro, 11 Pro Max, XS, XS Max, X, XR, 8, 8+

Samsung Galaxy S10, S10+, S10e,

Samsung Note10, Note10+, and others.

18. Mount-It! Premium Cup Holder Tablet Mount for Cars – Tablet ELD Mount – Heavy Duty Carbon Fiber Tablet Mount for iPad, Galaxy & Fire Tablet

The MI-7321 is a universal tablet car cupholder mount that enables you to use a tablet while on the road safely. It is a durable carbon fiber arm that displays your iPad tablet as you drive along.

The light locking knobs at the joints ensure that your tablet is firmly gripped to avoid shifting position or dropping on bumpy roads. You can easily install and remove this Mount from the center console or front seat without any special tools.  

Mount-It! Premium Cup Holder Tablet Mount for Cars
Mount-It!

Its base can easily expand to fit vehicle cup holders measuring 2.75 inches to 3.5 inches. What’s more, Mount it is secure and custom-built to absorb shock. The long arm allows for 11.5 inches of height adjustment, making it possible to serve in different ways. Also, it has multiple pivot points to offer full 360 degrees ranges of motion to enable you to interact comfortably.

Overall, the MI 7321 is easy to adjust and clamp device that supports iPad, Fire, Galaxy, Surface, and several other tablets having screens within the 7 to 11-inch range.

19.Car Wireless Charger Mount fit for Volvo XC90 QC 3.0 Fast Charging Compatible with iPhones and suitable for Samsung -Wireless enabled Charging Devices

Are you still troubled about where to place your phone in the car? Well, here is your answer! This car wireless charger mount for Volvo is custom made for smartphones measuring 4.7 inches / 5inches /5.5 inches and 6 inches. It is made of high-quality Chrome plus the ABS Material and was initially designed to fit in Volvo XC90, XC60, S90L, and V90.

Kucok Car Wireless Charger Mount fit made of high-quality Chrome plus the ABS Material.
Kucok Car Wireless Charger Mount.

Fitting is straightforward, and it is something you can DIY without any technical assistance. If you fit it well in say a 2020 Volvo XC90, someone may think it was installed in the factory; it fits so well. The Mount comes with a blue LED, but if you don’t like it, there is an option to switch it off. 

It also fits perfectly in the XC60 2019 Volvo, and the provided two USB ports are of considerable significance to the charging process as well. What’s more, it features a power button that you can use to charge or pause.

20. Wireless Car Charger Mount,10W Qi Fast Charging Automatic Clamping IR Sensor.

To get a quick charge, simply place your phone in the holder; and you don’t necessarily have to switch it off. The VANMASS Wireless Car Charger Mount has smart sensors that detect your phone and then clamp it automatically. Its grip is sound enough to keep your phone safe from shifting or falling while on a rough road. The smart properties also prompt the phone to switch off automatically in case of overheating or when the phone is fully charged.

Once the phone is charged, simply press the release buttons on the side, and the clamps will loosen automatically to enable you to take your phone.

The VANMASS Wireless Car Charger Mount
VANMASS

VANMASS combines the Qi wireless fast wireless charger and the car phone holder, which saves you from the hustle of using cables. You can install it on the car air vent to make phone calls and GPS a pleasant experience.

The system is thick case-friendly, meaning that while charging, you don’t need to take off the phone case. It has a high-efficiency chip to deliver 10 W for Samsung Galaxy, 7.5 W for iPhone, and 5W for all Qi enables phones. VANMASS serves phones measuring 4 inches to 6.5 inches, and for efficient charging, you are recommended to use the QC 3.0 car charger adaptor.

Given the nano-sucker, its base support provides powerful suction when fixed on the table, dashboard, or windshield. It has a ball head that can flexibly rotate 360 degrees for you create the most favorable angle. If you are a long-distance driver, then VANMASS Wireless is the best cell phone mount deal for you.

Conclusion

If you have never used nor bought wireless car mount chargers before, due diligence is necessary. Find out more about wireless charging online and read more reviews. We hope you have at-least gone this review and you will get one that suites your needs.

Like this article? Then you would definitely love our other articles. Are Smartphone Charging Stations safe and Wireless Charging for iPhones.

Photo of author

Matink

Matink is a "Jack Of All Trades" writer and admin at thegadgetsjudge.com. Matink love writing, and reading more about Technology, origin of life and understanding the universe. He is a qualified Master Electrician, Welder, Safety Professional and currently doing SEO and Google IT Support Professional Certificate at coursera.org. Follow Matink on twitter @thegadgetsjudge

Previous

The iClebo Robot Vacuums Review and Buyers Guide 2021

History and Inventions of Vacuum Cleaners

Next

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.